Rockford Fosgate P300X1 Punch Series 300W RMS x 1 at 2-Ohms, Class A/B Full Range Mono Subwoofer Car Amplifier
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Mono full-range amplifier
- • (4) 1-3/8" Self-tapping screws
- • 2.5mm Allen wrench
- • Quick setup instructions
- • Certificate of Performance
- • Owner's Manual
Why Choose Rockford Fosgate P300X1 Mono Subwoofer Amplifier?
Always Get a Loud, Powerful, Clean Sound Quality
A mono full-range amplifier that can bring out lots of power, whether to your center-channel speaker or subwoofer, giving you lots of flexibility, the Rockford Fosgate Punch P300X1 is a compact, high-quality, and affordable car amplifier that is a sure step-up from your old setup.The Rockford Fosgate Punch P300X1 features its proprietary C.L.E.A.N. technology, which ensures that you'll always get a loud, powerful, clean sound quality, especially at high volume levels.
Dynamic Thermal Management System
It also has Rockford Fosgate's famous Punch E.Q., where you can boost the amplifier's bass frequency output for a more heart-pounding low-frequency performance. With the help of the Dynamic Thermal Management system and its cast aluminum heatsink, the Rockford Fosgate Punch P300X1 can efficiently dissipate the heat build-up, allowing the amplifier to stay cool even after long hours of use.
Short Circuit and Overcurrent Protection Features
It also has short circuit and overcurrent protection features, so you won't have to worry about experiencing these issues. The Rockford Fosgate Punch P300X1 can handle a power output of 200 Watts RMS at 4 ohms and 300 Watts RMS at 2 ohms. This Class-AB amplifier also has a frequency response of 20 Hz to 20 kHz, allowing it to deliver an extensive full-range frequency performance with minimal distortion.
Frequently Asked Questions (FAQ)
- • Why does the amplifier keep going into protection mode?
Protection can be caused by overheating, an incorrect speaker load, shorted wiring, or poor power and ground connections. Check the subwoofer impedance, terminals, ventilation, and wiring before operating again.
- • Why does it shut off when I turn up the bass?
A shutdown at higher volume can indicate the electrical system cannot supply enough current or the amplifier sees an unsuitable load. Check the battery, charging system, wiring, and subwoofer impedance.
- • Why is there no bass even though the amplifier turns on?
Check the RCA or signal connection, gain, low-pass filter, and subwoofer wiring. Confirm the head unit sends a subwoofer signal and verify the speaker terminals are connected with correct polarity.
- • Why does the amplifier get extremely hot during use?
Some heat is normal, but excessive temperature can indicate poor ventilation, an unsuitable speaker load, or prolonged high output. Mount it where air can circulate and verify the subwoofer impedance.
- • Why does the subwoofer sound distorted?
Distortion can result from excessive gain, bass boost, or source clipping. Lower the gain and EQ boosts, then verify the amplifier receives a clean signal and operates within its recommended load.
- • Why do I hear engine noise through the subwoofer?
Engine-speed-related whining is often linked to grounding or signal interference. Check the amplifier ground and RCA connections, and route signal cables away from power wiring and electrical interference.
- • Can I use a dual voice coil subwoofer with this amplifier?
Yes, provided the voice coils are wired to create an impedance the amplifier supports. Calculate the final load before connecting, since an impedance that is too low can trigger protection.
- • Why is my subwoofer not getting enough power?
Check the gain, signal voltage, speaker wiring, and final impedance. Also verify the power and ground cables are properly sized and securely connected, as inadequate supply can limit performance.
- • Why does the bass sound weak even after adjusting the gain?
Gain alone does not determine bass output. Check the low-pass filter, subwoofer polarity, enclosure design, signal source, and phase relationship. Incorrect wiring or an unsuitable enclosure can reduce bass.
- • What size power and ground cables should I use?
Use properly sized cables based on the amplifier's current requirements and installation length. Keep the ground short and secure on clean chassis metal, with the appropriate fuse near the battery.
- Maximum Power : 300 Watts
- Number of Channels : 1
- Frequency Response : 20-20000 Hz
- Amplifier Class : A/B
- Fuse Rating : 50 A
Features:
- 12dB/octave Butterworth crossover
- Features C.L.E.A.N. Set-up
- High level input capable with Auto Turn-On circuit
- On-board Punch EQ with +18dB boost @ 45Hz
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- Short circuit protection
- Over current protection
- Cast aluminum heatsink
- Muted turn on
- Stealth top mounted control panel
- 1 Year Warranty
Specifications:
- RMS Power Output (Watts x Channels): 200 x 1
- Peak Power Output (Watts x Channels): N/A
- Power at 2 Ohms (Watts x Channels): 300 x 1
- Bridged Power (Watts x Channels): N/A
- Minimum Impedance Bridged: N/A
- Minimum Impedance Unbridged: 2
- Minimum Impedance: 2
- Best Frequency Response: 20-20k Hz
- THD at Rated RMS Power: 1%
- Signal to Noise Ratio: 85 dB
- Input Voltage: 14.4v
- Amplifier Class: AB
- Low-Pass Crossover Frequency: 50-250 Hz
- Low-Pass Slope (dB/octave): 12 dB/octave
- High-Pass Crossover Frequency: 50-250 Hz
- High-Pass Slope (dB/octave): 12 dB/octave
- Bass Boost: 0-18 dB
- Bass Boost Frequency: 45 Hz
- Fan Cooled: No
- Fuse Rating: 50
- Speaker Level Inputs: Yes
- Preamp Outputs: 2
- Width (inches): 9-15/16
- Height (inches): 2-7/16
- Depth (inches): 8-13/16
- Parts Warranty: 1 Year
- Labor Warranty: 1 Year
- UPC: 780687342265
- Weight: 9
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
I did not expect that this was a full range amp as I bought it for my subwoofer, but when I tried it with one of my speakers, wow, it sounded really good. As of now, I am using it to power up my sub, but having this one in my setup is really like hitting two birds with one stone.
-
Nice bass from my new amp. Great product from Fosgate. Gives you more space with its compact body. Good power for an amp powering an 8 inch sub like in my setup.
-
Might be the best amp for value I’ve ever owned. Unfortunately its just for subs but the Alpine sub I just bought really sound so much better with the amp. Never have to worry about its power output too.